Call us now for information

Telephone: (01530) 267209

Search Our Catalogue

To search our catalogue please select from the options below. If you would like further information please contact us.

Regulators – Corrosive and Toxic

The 400 Series SilcoNert 1020 coated regulators are intended for primary pressure control of reactive or corrosive calibration mixtures or pure gases in applications where an extreme inert wetted finish is required. The proprietary non-reactive amorphous silicon finish is desired over standard 316L stainless steel and ideally suited for H2S, reduced sulphur, mercury and PPM to PPB calibration mixtures.


CONCOA 420 Regulator

Key Features – Single Stage, SilcoNert 1020 Coated Body/Diaphragm/Internals, 316L Stainless Steel Barstock Body, Six Port Configuration, Inert Surface Finish and Corrosive Resistance.

Typical Applications – Reactive calibration standards, emission monitoring, H2S PPM to PPB standards, Mercury standards, Sulphur mixtures and Corrosive service.

420 Series Regulator with Flow Curve


CONCOA 430 Regulator *see below

Key Features – Dual Stage, SilcoNert 1020 Coated Body/Diaphragm/Internals, 316L Stainless Steel Barstock Body, Six Port Configuration, Inert Surface Finish and Corrosive Resistance.

Typical Applications – Reactive calibration standards, emission monitoring, H2S PPM to PPB standards, Mercury standards, Sulphur mixtures and Corrosive service.

430 Series Regulator with Flow Curve


CONCOA 455 Regulator

Key Features – Single Stage, Electroless Nickel-Plated Forged Body and Corrosive Resistance.

Typical Applications – Hydrogen Chloride, Chlorine, Boron trichloride, Hydrogen bromide, Hydrogen sulphide and Dichlorosilane.

455 Series Regulator with Flow Curve

Please contact us for a quote or if you have any questions.


Snapshot of the 430 SilcoNert

The 430 Series SilcoNert 1020 coated regulators are intended for pressure control of reactive or corrosive calibration mixtures or pure gases in applications where an extreme inert wetted finish is required along with stable delivery pressure regardless of inlet pressure. The proprietary non-reactive amorphous Silicon finish is desired over standard 316L stainless steel and ideally suited for H2S, reduced Sulfur, Mercury and PPM to PPB calibration mixtures.

Key Features

  • Dual Stage
  • SilcoNert™ 1020 Coated Body, Diaphragm, and Internals
  • 316L stainless steel Barstock Body
  • Six Port Confi guration
  • Inert Surface Finish and Corrosion Resistance

Typical Applications

  • Reactive calibration standard
  • Emissions monitoring
  • H2S PPM to PPB standards
  • Mercury standards
  • Sulfur mixtures
  • Corrosive gases

Features

  • Metal-to-Metal Diaphragm Seal – No possibility of gas contamination
  • Capsule® Seat – Increased serviceability and life
  • Stainless Steel Barstock Body – Increased corrosion resistance
  • Front and Rear Panel-Mountable – Versatile system configuration
  • Pressure Ranges 0-15 to 0-500 PSIG – Broad range of applications
  • Pipe Away Relief Valve – Safely vents exhaust gases

Materials

  • Body – 316L stainless steel barstock
  • Bonnet – Chrome-plated brass barstock
  • Seat – PTFE, PCTFE with 4500 PSIG inlet option
  • Filter – Patented 10 micron 316 mesh
  • Diaphragm – 316L stainless steel Internal Seals – PTFE

Specifications

  • Maximum Inlet Pressure – 3000 PSIG (210 BAR), 4500 PSIG (310 BAR) optional
  • Temperature Range – -40°F to 140°F (-40°C to 60°C)
  • Gauges – 2″ diameter stainless steel (bourdon tube not coated)
  • Ports – 1/4” FPT
  • Helium Leak Integrity – 1 x 10-9 scc/sec
  • Cv – 0.1 Weight (432 2021-580) – 5.09 lbs. (2.31 kg)

 

Product Search


Got a Question?

For information please start your enquiry below:


Need some more information about special gases or gas equipment?

Call Us Today:

Special Gases & Gas Mixtures: (01530) 267209

Head Office Address:

CK Special Gases Limited,
Johnsons Bridge Road,
West Bromwich,
B71 1DG

Contact Details

Special Gases & Gas Mixtures
Tel: 01530 267209
E-mail: sales@ckspecialgases.com

CK Special Gases Limited, Johnsons Bridge Road, West Bromwich, B71 1DG

CK Special Gases Ltd © 2019 - HTML Sitemap

Website Design by Derby Web Design